Haben Sie noch Fragen?

Recently, there has been an incredible amount of verbal and written media coverage on BPA, which has caused many to wonder if they are being exposed to it, and what the resulting health affects are. Today, within its product portfolio, SIG has zero bags and pouches that contain–or are made with–BPA. An official letter on this topic has been issued by SIG. So, regardless if BPA does or does not have negative health affects, it is not found in SIG's bags and pouches; therefore, not a risk to its customers.

What is BPA?

Bisphenol A (BPA) is a molecule most commonly used in the production of polycarbonate (PC) and epoxy resins. Common applications where PC resins are used are automotive light covers, compact disks, and water bottles; overall, it has an excellent combination of clarity, heat resistance, and stiffness. With its outstanding adhesion to a variety of substrates, epoxy resins are commonly used as adhesives and protective coatings.

Within the above mentioned media coverage, some uninformed journalists have made a direct link between BPA and the recycling symbol number 7, which is formally designated as all “Other” materials not included in recycling symbol numbers 1 to 6. While small portions of recycling symbol number 7 packages do contain BPA, the way it has been presented has been misleading.

Often multiple non-BPA materials are combined to satisfy barrier and performance requirements that result in them being classified as recycling symbol number 7. One example of this is SIG's HyBar product line, which combines polyethylene terephthalate (PET: recycling symbol number 1) with low density polyethylene (LDPE: recycling symbol number 4) to form a laminated film that has outstanding oxygen protection and physical strength. Simply put, there are many recycling symbol number 7 packages that do not contain BPA.

Information provided by David Bellmore, Director of Film and Fitment Development.

Information provided by David Bellmore, Director of Technology for bag-in-box and spouted pouch 

Some of SIG’s bag-in-box bags and taps are recyclable where Resin Identification Code (RIC) 7 is accepted. RIC 7, or “Other,” refers to products containing mixed plastics or those which might have additional components including non-petroleum-based plastics. If a SIG product is marked as RIC 7, it is likely because the tap or spout has a different type of plastic than the bag itself.

Some of SIG’s bag-in-box bags and taps are marked as RIC 4, or “LDPE.” Low-density polyethylene is a common plastic used in flexible packaging and is easily recyclable by most municipalities.

As always, recyclability of bag-in-box bags is contingent upon the disposal requirements of the product contained and the capabilities of the local municipality.

Die FSC-Kennzeichnung muss in Übereinstimmung mit den Vorgaben der FSC-Kennzeichnungsrichtlinie angebracht werden.

Im Tiefdruckverfahren gibt es keinen Punktzuwachs.

Flexible packaging, unlike rigid packaging, has the ability to increase the product-to-package ratio, reducing overall waste from excess packaging and product that would have otherwise been left in the package.

With less material required in production and a resulting lower material weight in flexible packaging systems, this method of packaging results in less post-consumer solid waste. This means that after a consumer is done using the product and its packaging, there will be less of the package content to dispose of than, for example, glass or aluminum. In addition, a large portion of flexible packaging volume comes from corrugate, which is highly recyclable and is able to be reused, therefore reducing the amount of waste that ends up in landfills after use.*

Outside of this, flexible packaging helps to prolong the open shelf life of products. Since the package collapses on itself as the product is evacuated, air cannot enter the package and degrade the product quality.

Different packaging filling conditions affect storage requirements, shelf life, and ultimately the quality of the product. The below chart looks at ambient, extended shelf life, hot-fill, aseptic high-acid, aseptic low-acid and retort filling conditions.

Also learn why aseptic processing and packaging can produce a more high-quality product than Hot-fill or Retort processing. 

Der Proof ist für alle dargestellten Farben maßgebend und verbindlich. Dies gilt nicht für Metallic-Farben und einige wenige Farben, die nicht im Proof-Farbraum dargestellt werden können. In diesen Fällen werden die betreffenden Farben mit echten (druckgeprüften) Farbkarten wiedergegeben. Auf dem Proof werden diese Farben als "nicht verbindlich und farbverbindlich" gekennzeichnet.

Der Druck von Weiß ist nicht möglich. Im Allgemeinen ist die Verwendung von Weiß nicht erforderlich, da der Bedruckstoff ausreichend weiß ist.

Um einen logischen Anschluss zu gewährleisten, sollte in der Entwurfsphase eine möglichst einfache Verbindung eingeplant werden. Kleine Elemente oder Text sollten in diesem Bereich vermieden werden. Es besteht sonst die Gefahr, dass Elemente teilweise abgeschnitten werden oder doppelt vorkommen. Aufgrund möglicher Fertigungstoleranzen lässt sich dies nicht vermeiden.

Eine Datenübernahme ist grundsätzlich möglich. Allerdings müssen die Daten an die Eckdaten des SIG-Packungssystems angepasst werden. Je grösser die Abweichungen zwischen den Dimensionen der einzelnen Seitenteile sind, desto aufwändiger ist die Umstellung, und es lässt sich unter Umständen nicht vermeiden, dass das Design verändert wird.

Im Prinzip ja, aber die folgenden Punkte müssen beachtet werden.

- Nur ein Nutzen gilt als farbverbindlich, die anderen ergeben sich entsprechend.

- Die maximale Anzahl an möglichen Nutzen ergibt sich aus dem formatabhängigen Gesamtnutzen der Druckform.

- Eine Sortierung der Mehrfachzuschnitte ist nach der Produktion nicht mehr möglich.

Farbfreigaben können mit PDF-Dateien nicht erteilt werden. Je nach Monitor/Drucker des Betrachters ist die Wiedergabe der Farben sehr unterschiedlich und nicht farbverbindlich. PDF-Dateien werden für die Freigabe von Text, Layout, EAN-Code und Öffnungshilfen verwendet.

Ja, aufgrund der unterschiedlichen Ausschnitte für die Öffnungshilfen und der unterschiedlichen technischen Marken je Öffnungshilfe muss das Design angepasst werden. Je nach Dekor und/oder Gestaltung der Packungsoberseite müssen ein oder sogar mehrere neue Druckzylinder hergestellt werden.

Bei allen Kartonpackungen mit seitlicher Längsnaht ist der Rücken 3 mm schmaler. Der fehlende Bereich wird von der linken Seitenfläche ergänzt. Um zu vermeiden, dass Elemente abgeschnitten werden, müssen die Satzspiegelgrenzen beachtet werden.

Die Vorder- und Rückseite des Kartons sind in der Keyline gekennzeichnet. Die endgültige Festlegung, welche Seite der Kartonpackung die Vorderseite sein soll, kann nur vom Kunden vorgenommen werden. Neben anderen Faktoren muss auch die geplante Positionierung der Kartonpackung in den Verkaufsregalen berücksichtigt werden.

Druckkontrollen und Freigaben werden bei unseren Zylinderlieferanten durchgeführt. Der Sinn des in diesem Fall erstellten Andrucks ist es, eine farbverbindliche Wiedergabe des freigegebenen Farbproofs zu erstellen. Geringfügige Farbkorrekturen sind jedoch möglich. Der in der Druckprüfung und -freigabe freigegebene Andruck und nicht der Farbproof ist dann der verbindliche farbverbindliche Proof für die Herstellung des Packungsmaterials.

Gegenwärtig gibt es keine Optionen für Veredelungen.

Die angezeigten Punkte simulieren die so genannten "Missing Dots", die während des Produktionsprozesses auftreten können. Missing Dots sind Vertiefungen im Bedruckstoff, in die keine Farbe übertragen wird. Die Anzahl der weißen Punkte variiert je nach Tonwert und nimmt mit zunehmendem Tonwert ab. Die Simulation kann die Realität nicht zu 100% wiedergeben. Während der Produktion kann die tatsächliche Anzahl der Missing Dots sehr viel höher oder sehr viel niedriger ausfallen.

Alle dargestellten Farben basieren auf speziell für SIG erstellten Farbprofilen. Aus technischen Gründen können jedoch in einem Farbprofil maximal 4 Farben im Aufdruck wiedergegeben werden. Wenn mehr als vier Farben im Dekor übereinander gedruckt werden sollen, muss ein zweites Profil verwendet werden. Der erste Proof würde also z.B. das Bild verbindlich farbverbindlich darstellen, während der zweite Proof den Hintergrund korrekt wiedergeben würde.

Farben aus Farbsystemen wie Pantone werden im SIG-Druckverfahren nicht verwendet. Die Lebensmittelvorschriften und das Kartonmaterial schränken die Farbauswahl ein. Im reprografischen Satz werden die Pantone-Farbspezifikationen so weit wie möglich an die C-Farben von SIG angepasst (siehe SIG Color Guide) und auf dem farbverbindlichen Proof wiedergegeben.

Durch die Verwendung des SIG Color Guides zur Festlegung der gewünschten Farben bereits in der Entwurfsplanung können nachträgliche Farbanpassungen mit unnötigen Korrekturrunden vermieden werden. Die Bearbeitungszeit des Dekors wird dadurch verkürzt.

Der von SIG erstellte Proof basiert auf Profilen, die den Druckprozess bei SIG simulieren. Bei der Erstellung dieser Profile werden das zu bedruckende Material, die verwendeten Farben und der eigentliche Druckprozess berücksichtigt. Durch diese aufwändige Vorarbeit können wir sicherstellen, dass die erstellten Proofs nahezu 100% farbverbindlich sind. Darüber hinaus wird der Proof aus den Daten erstellt, die letztlich auch für die Gravur verwendet werden. Mit der erneuten Freigabe wollen wir auch sicherstellen, dass der aktuellste Stand der Daten den Anforderungen des Kunden entspricht.

Aufgrund von Passerschwankungen können negative weiße Texte in mehrfarbiger Umgebung unleserlich sein. Wir empfehlen daher, die betreffenden Texte positiv auf eine aufgehellte Fläche zu drucken. Sind negative weiße Texte unvermeidbar, muss eine Kontur um den Text herum angelegt werden. Alternativ kann die Umrandung durch Überfüllung mit einer kontrastreichen Farbe ersetzt werden.

Sonderfarben werden eingesetzt, um den Druck des Designs so akkurat wie möglich zu gestalten. Bei der Farbsimulation sind Produktionstoleranzen wie Passerschwankungen und Farbdrift möglich - diese können durch den Einsatz von Sonderfarben minimiert werden.

Eine Umsetzung in CMYK ist prinzipiell möglich. Dies ist jedoch abhängig von der Gestaltung und den verwendeten Farben. Wir drucken nicht - wie im Offsetdruck häufig üblich - mit den Standard-Farben, sondern definieren den Farbaufbau je nach Design mit Sonderfarben, um eine maximale Produktionsstabilität zu gewährleisten. In der Regel werden CMY für fotorealistische Bilder verwendet und eine spezifische Farbe der Marke sowie eine Textfarbe definiert. Mehr dazu auch in der nächsten Frage "Warum werden Sonderfarben verwendet?".

Trapping bedeutet: Überfüllung. Da beim Druckverfahren mehrere Farben übereinander und nebeneinander gedruckt werden, wird das Trapping aufgrund der unvermeidlichen Passerschwankungen im Druckprozess angewendet. Andernfalls können an den Stellen, an denen zwei Druckfarben aufeinandertreffen, weiße Ränder, so genannte Blitzer, entstehen.

Die Größe des EAN-Codes muss mindestens der SC01 (91 %) entsprechen. Die Positionierung des Codes sollte vertikal sein (Ausrichtung der Striche in Druckrichtung).

Zur Freigabe des Dekors erhält der Kunde/die Agentur in der Regel einen Epson Proof. Dieser Proof ist verbindlich für Texte, Farben und für das Layout. Sind Farbkorrekturen erforderlich, müssen diese mit einem neuen Epson-Proof erneut dargestellt werden. Kleinere Änderungen wie Textänderungen, Verschiebungen von Elementen etc. können über eine PDF-Datei dargestellt werden, sofern eine Farbfreigabe über einen Epson-Proof erfolgt ist.

Der Druck erfolgt im Rotationstiefdruckverfahren. Eine Ausnahme bildet das Produkt SIG SafeBloc, das im Flexodruckverfahren hergestellt wird.

SIG hat ein eigenes Farbsystem. Je nach den im Dekor verwendeten Farben wird ein individuelles Farbprofil erstellt. Dieses Profil simuliert zum einen die Farbwiedergabe, aber auch typografische Eigenschaften und den Bedruckstoff.

SIG bietet vier verschiedene Metallic-Farben an (eine Silber- und drei Goldvarianten). Gerne stellen wir Ihnen Muster zur Verfügung. Bitte fordern Sie diese bei uns an.

A typical retail bag-in-box package can look similar to any of the below images. It typically consists of a bag and a box. The bag is made from a variety of plastic films, with a spout and cap or tap sealed onto it for dispensing the liquid inside. The box is typically corrugate, sized and fluted to the specifications of the product it contains. Retail bag-in-box packages can be found in the food, beverage, and non-food sectors, in sizes from 1L to 10L.

Trends of note in this space include:

• Storytelling Packaging: Brands can take their packaging to the next level, making the package a tool to communicate their brand story. Online brands  don’t have the luxury of getting their products into the hands of consumers before purchase, so designs must work harder than those in brick and mortar stores.*
• Ecologically-Aware Packaging: Brands are looking to minimize the amount of materials needed to package their products** – flexible packaging provides excellent source reduction.
• New Packaging Formats: More and more brands are looking to branch out from traditional package formats – like bottles and cans – and into new packaging concepts. Each year we can see a lot of concepts that play with different forms of packages, so expect to see new forms for traditional products.**

* Webber, P. (2020, January 16). 5 Packaging Design Trends That Will Dominate 2020. Retrieved August 3, 2020, from https://www.packagingstrategies.com/articles/95309-packaging-design-trends-that-will-dominate-2020

** Team, 99. (2020, August 19). 11 Top Packaging Design Trends for 2020. Retrieved August 3, 2020, from https://99designs.com/blog/trends/packaging-design-trends/#:~:text=The biggest packaging design trends for 2020 are:&text=Blurry color splotches and blurred,Natural & earthy pastels

Shelf stable means that the filled package can be stored for long periods of time in ambient conditions without refrigeration or freezing. Some liquids are naturally shelf stable, and do not spoil, while others have to be processed and filled via hot-fill or aseptic to achieve the required sterility so that they can be treated as such.

Non-perishable products such as these include canned and bottled foods, rice, pasta, and foods processed in aseptic packages. In order to be treated as shelf stable, “perishable food must be treated by heat and/or dried to destroy foodborne microorganisms that could cause illness or spoil foods.”* Our aseptic bag-in-box packaging provides the treatment necessary to maintain its sterility for products to be able to sit on shelves for an extended period of time, and thus be considered shelf stable.

Closed-loop dispensing systems are systems where both the product and dispenser interface are completely closed, before, during, and after the dispensing process. This eliminates contact exposure. “These systems offer safety and convenience by minimizing opportunities for contamination while in-use and extending freshness upon opening.” Closed-loop dispensing can be used in both bath-in-box and pouch packaging.

According to the Sustainable Packaging Coalition, a sustainable package is:

• Is beneficial, safe and healthy for individuals and communities throughout its life cycle.
• Meets market criteria for performance and cost.
• Is sourced, manufactured, transported, and recycled using renewable energy.
• Maximizes the use of renewable or recycled source materials.
• Is manufactured using clean production technologies and best practices.
• Is made from materials healthy in all probable end-of-life scenarios.
• Is physically designed to optimize materials and energy.
• Is effectively recovered and utilized in biological and/or industrial cradle-to-cradle cycles.

UN packaging requirements involve a series of protocols to guarantee safety during the transportation and storage of goods. UN packaging testing is a series of tests and requirements to determine the integrity and safety of the package when facing various situations. Once a package has undergone a series of safety tests, the package is considered safe for transportation and is UN-Certifiable.*

Tests conducted in this process include testing for leakage, reactions to pressure, ability to undergo stacking, and resistance to piercing. After all testing is completed, and a report has been drawn up to show that they were successful, a package is considered UN-Certified.*

*UN Packaging Requirements: Complete Guide. (2020, April 07). Retrieved July 06, 2020, from https://www.safeloadtesting.com/un-packaging-requirements-complete-guide/

Foods and beverages that are retailed and stored in normal room temperature are called ambient food.* Also known as fresh, this packaging occurs when a product is filled into a package with no additional sterilization treatment. Ambient packaging treatment fights off harmful microorganisms with heat to avoid contamination to food products.* With ambient-filled food or beverage packaging, the products must either be refrigerated or frozen in order to maintain their shelf life.

*Ambient Food Packaging Market Analysis – Global Industry Size, Share, Trends and Forecast, 2014 – 2024. (n.d.). Retrieved July 07, 2020, from https://www.acumenresearchandconsulting.com/ambient-food-packaging-market 

Aseptic filling is a processing technique that makes it possible to package items that are shelf stable without preservatives. Items that are packaged aseptically do not need to be refrigerated and can be safely consumed for up to twelve months.

The FDA has developed a set of standards for aseptic filling because it is used for so many products, particularly food and pharmaceuticals.

How does aseptic filling work?

Aseptic filling works by introducing a pre-sterilized product into a pre-sterilized container. Items are sterilized using ultra-high temperatures for a few seconds at a time.

By keeping all parts of the filling process sterile, harmful microorganisms are kept out of the final package and there’s no need for refrigeration. This is done in four steps:

• One: The product to be packaged is sterilized, cooled, and put into a filling machine
• Two: We send pre-sterilized packaging that is safe and ready for you to use
• Three: External package surfaces are re-sterilized using our Vapor Sterilant Technology™
• Four: The package enters a pre-sterilized environment and is filled and hermetically sealed

Some examples of items that are commonly packaged using aseptic technology are milk, coffee, and fruits and vegetables. Items retain their original flavor, color, and nutritional value while retaining their freshness.

Bag-in-box packaging utilizes a box, bag, and fitment to transport and dispense liquid products both efficiently and without contamination.

• Bag: The bag is constructed from layers of film that are sealed together and designed to protect the product quality and keep it safe inside from filling through end use.
• Spout: The foundation of our all bag-in-box fitments, this plastic-framed opening is sealed into the bag when it’s made and is the entry point for filling the product into the bag. After filling, bag spouts are covered by either a simple cap, dispensing tap, or connector and fitment depending on their intended end-use.
• Fitment: This is a broader category of items including spouts, caps, valves, and more. It encompasses anything that attaches to the bag spout. Bag-in-box fitments can be anything from simple caps that cover a spout, to sophisticated dispensing valves or connecters and hoses that bridge between the spout/valve and outside dispensing equipment.
• Box: the outer package that holds the capped and filled bag. This can be anything from a simple cardboard box to an industrial-sized steel drum.

The bag is first filled with liquid product, and then a fitment is placed to secure the packaging. The bag is then placed in a box to ensure safety in transportation and dispensing.

Bag-in-box history

Bag-in-box was pioneered and patented by William R. Scholle in 1955, and it was initially used to safely transport battery acid to automotive filling stations and repair shops. While only starting off in the automotive industry, this packaging system quickly spread to other industries. After the aseptic filling process was perfected in 1956, bag-in-box was able to expand into working with food and beverage products. Learn about the roll Scholle IPN played in developing aseptic packaging.

*Co-extruded film is a multilayer film produced by a compound molding technique that extrudes thermoplastic resin with multiple extruders and passes that through a single die to build up layers of melted resin both on the inside and outside of a film. A film can be produced on a blown film or cast film extrusion line. It can be made with one layer or multiple layers of material. When a film is made with one layer of material, it is called a mono-layer film. When it is made with multiple layers of material, it is called co-extruded film. Scholle IPN uses blown film extrusion and has lines with up to 9 layers of film. Some examples of our co-extruded films include the 7-layer EnduraShield Advance and the 5-layer FlexiShield Advance.

*What is Coextruded Multilayer Films ?: Coextruded Multilayer Films. (n.d.). Retrieved July 23, 2020, from https://www.dic-global.com/en/products/film/about.html

Laminates are created when a piece of equipment takes two (a structure called duplex) or three (a structure called triplex) films and adheres (or bonds) them together. SIG uses solvent-free technologies for this process for both adhesive and thermal lamination. Laminates are used for a variety of flowable products, and SIG’s unique structures are designed to keep products safe while extending their shelf life. Laminates can be used in combination with fitments and filling equipment to create a complete solution to meet all needs.

When it comes to printed film, we offer printed roll stock using flexo or roto technology. This print can be on the surface of a film, or reverse printed on a substrate and then laminate to protect it inside the structure. Learn more about one of our film manufacturing locations here!

In a “gravity-dispense” package,  the cap is removed from the package and a valve is attached to the spout. The package is then hung in a rack that points the valve downward. Gravity then forces the product to flow when the valve is opened.

Horizontal Form-Fill-Seal is a piece of equipment that both produces a pouch from roll stock film and spout and cap assemblies, and fills it in the same operation. The film or laminate travels through the machine in a horizontal direction, which gives the machine the “horizontal” description. This process accounts for all parts of manufacturing a complete pouch product, from film unwinding, pouch forming, filling and sealing, as seen below. A benefit of HFFS is that it optimizes the total cost of ownership and allows for more flexibility in sizes and shapes in production. It also provides the manufacturer with total control of their packaging process.

Hot-fill packaging is a way of sterilizing the package prior to the filling process to ensure the protection and longevity of shelf life for a wide range of products. This process works by first filling heated, commercially-sterile products in non-sterile packaging. This means that the liquid is heated to near boiling (~ 92 Celsius) before it is filled into the package. Once filled, the package is inverted so that the hot liquid comes in contact with all of the package’s internal surfaces. It is then held at a high temperature for a set period of time, before it is cooled to room temperature. Only high-acid products can be hot-filled and held at ambient temperatures without refrigeration.

Pouch packaging is a flexible packaging product made from barrier film, foil, and spout and cap fitments that supports flowable liquid products. Pouches are designed with the flexible needs of the consumer in mind, as there are flexible sizing options to fit any product.

With CleanPouch Aseptic, pouches are able to be stored in ambient temperatures and products maintain their freshness for long periods of time. Pouches are lightweight, compact, and have minimal product waste because of its flexible material that breaks down as it is used. Recycle-ready pouch options are also available using RecShield barrier film.

Pour-out packaging is where the user pours the product from the bag-in-box package (either from the box or bag). The fitments for pour-out packaging are typically simple spouts with an over-cap.

Pump-out packaging is where the bag has some sort of adaptor type cap that attaches to a hose and pump by a connector. The pump then pulls the product from the bag and delivered to a remote location. Operation of the pump is either automatically controlled by a CO2 pump or by the user operating a manual pump lever.

Slash-and-serve packaging is where the bag is cut and the product dumped out of the bag and into another vessel.

Source reduction means minimizing waste before it’s created. It means using less to make packaging and products. Right now, over 60% of all materials are landfilled or incinerated. Approaching this problem from a source reduction standpoint would ask companies to eliminate wasteful practices and invest in technologies that improve efficiency in packaging. This can take on a few forms:

• Using fewer materials to create a product
• Cutting the weight or volume of an item
• Simplifying the supply stream or an item’s transportation needs
• Bringing production in-house to avoid shipping overhead

Eliminating waste is fundamental to building a circular economy. Committing to source reduction isn’t a fixed set of principles, but rather an overall approach to how we pick, design, and transport materials. Some choices are more obvious than others: developing recycle-ready films is a tangible step towards source reduction, while designing fitments that require no threading and use less plastic is an important, but perhaps less obvious step towards source reduction.

At Scholle IPN, source reduction is a key tenet to how we approach sustainability. Our flexible packaging has a higher product-to-package ratio, which means more of an item can be packaged with fewer materials. Our aseptic technology means we can eliminate refrigeration and cold storage throughout the supply stream. Source reduction happens at every step of the supply chain and is one of the most impactful ways companies can build a more sustainable future.

The FDA CFR113 defines low-acid foods (other than alcoholic beverages) as having a finished equilibrium pH greater than 4.6 and a water activity (aw) greater than .85. For example, tomato products having a finished equilibrium pH less than 4.7 are not classified as low-acid foods. The division between low-acid and high-acid foods is based on the limited pH growth of clostridium botulinim.

• High-acid products have a pH lower than 4.6
• Low-acid products have a pH level higher than 4.6

Learn more about aseptic packaging technology here!

Our fully-equipped Materials Science Lab supports all of our locations across the globe through specialized scientific testing that ensures products will meet all goals and regulations. Lab experts do this important work through four distinct types of projects:

• R&D: For any new project, specifications are set for performance and the team continues refining the product until it hits the specification goal.
• Manufacturing Support: This covers anything a manufacturing plant needs to know before changing a product or process, and includes continuous improvement, expansion, and other types of manufacturing projects.
• Commercial Support: Projects that enable customers to find the right solutions for their products. This covers a variety of tests that observe compatibility between products, dispensers, and the packaging materials, as well as analysis of competitor’s solutions and products.
• Quality Support: Investigating customer complaints, and then finding solutions to correct errors, support customers, and keep product quality high.

Get an Inside Look at Our Materials Science Lab!

Located at our headquarters in Northlake, Illinois, this fully-equipped lab is staffed by expert scientists with chemistry and engineering backgrounds who develop testing methods supporting all of our locations across the globe, as well as technicians that operate the lab’s sophisticated analytical equipment.

https://www.youtube.com/watch?v=2WxgOqMda4I 

Aseptic processing and packaging is the filling of commercially-sterilized products into pre-sterilized containers.

1. After you process, commercially sterilize, and cool your product, it’s ready to deliver to the filler.
2. We pre-sterilize incoming flexible packaging, so when it arrives at your location, it’s safe and ready for aseptic filling.
3. The external surfaces of the cap and spout are then re-sterilized with our patented Vapor Sterilant Technology™ (VST).
4. Your flexible package then enters a pre-sterilized, enclosed atmosphere that is free of microorganisms, where the cap is removed to begin the filling process. Filling takes place through the spout. The cap is then hermetically sealed onto the spout, creating a contained sterile package for your aseptic product.

Hot Fill Processing

Hot-fill takes place when you fill heated, commercially-sterile product in non-sterile packaging. The product is held for a predetermined time and temperature in order to sterilize the packaging prior to the filling process. The longer hold time at high temperatures reduces quality of the product. Only high-acid products can be hot-filled and held at ambient temperatures without refrigeration.

Retort Processing

Retort takes place when you fill non-sterile product in hermetically-sealed, non-sterile packaging. The packaging is loaded into a retort pressure vessel and subjected to pressurized steam.  The product is also exposed to high temperatures for a much longer period than in hot-filling. The additional time can significantly deteriorate the overall quality and nutritional content of the product.

Aseptic Processing

Aseptic is a desirable alternative to hot-fill or retort processing because it doesn’t expose products to extended periods of high thermal temperatures, which can lead to vitamin, color, taste, and texture degradation. The aseptic process ultimately ensures a better quality product that can still maintain shelf-stable distribution.

Learn More About Aseptic Packaging Technology >

In the 1970’s, SIG developed the aseptic filling machine which enabled the bag-in-box packaging process. Prior to SIF, the aseptic process had been limited to cans and was most commonly used for dairy products. Aseptic packaging for bulk bag-in-box allowed processors to provide out-of-season products throughout the year, revolutionizing the storage and transportation of processed fruit and vegetable products.

In recent years, we have seen a shift in consumer demands towards healthy beverage options, resulting in the growth of the aseptic drink category. SIG's advancements in filling equipment and bag-in-box technology provide solutions for retail and institutional establishments who wish to offer coffee, dairy, juice, smoothies, and other functional beverages, while retaining nutritional value.

The Materials Science Lab has equipment to support analytical testing, application testing, and mechanical testing for film, bags, fitments, and pouches.

Testing is all about determining fitness for use. The lab team develops tests by looking at what products go through in every part of the process from production through end use. The lab team then distills that whole process into a few reliable tests that can be done in the lab to determine fitness for use in a timely fashion. Our tests and testing equipment includes:

• Vibration Table
• Material Durability Analysis
•  Gelbo Flex Resistance
•  Drop Testing
• Evacuation Tests
• OTR (oxygen transmission rate)
•  Fitment Testing
•  Tensile, elongation, tear, and puncture tests for barrier films
•  Pilot Line for New Film Trials
• ... and More!

https://www.youtube.com/watch?v=2WxgOqMda4I 

Refrigeration serves to slow or prevent the growth of microorganisms in the product.

Products that are aseptically processed are commercially sterilized to kill harmful microorganisms. These products are filled into a sterilized package using a sterile filler.

Since both the product and package have been sterilized, the sealed package is shelf-stable and refrigeration is not required.

Learn more about aseptic packaging technology here! 

The majority of consumers shop online—and that’s no surprise to anybody. In the United States alone, ecommerce sales reached an estimated $591 billion dollars⁽¹⁾, and globally ecommerce sales are expected to reach $4.9 trillion in 2021⁽²⁾. Over half of all millennials prefer shopping online versus in-person⁽³⁾, and the COVID-19 pandemic has made online sales a necessity for people looking to get their products safely. And as the above numbers suggest, online sales are only going to continue to grow and reshape the way consumers buy products.

Mintel research indicates that only 11% of ecommerce customers are completely satisfied with the way their packages are received. How common is it to order something small and receive a package that feels redundant? Perhaps a box within a box? Or maybe dozens of torn up pieces of paper and tissue, meant to pad your purchase, only to be broken in transit?

As easy as it is to order online, it’s also easy to review products and purchases, so the final moment when a consumer opens a package is critical. 77% of millennials trust written reviews on websites like Amazon and Yelp just as much as they do a verbal recommendation⁽⁴⁾. A few complaints about wasteful packaging or damaged products can be enough to tank a product’s online reliability.

Improving your customer’s ecommerce experience is crucial to the viability of your business, and flexible packaging gives your customers a satisfying ecommerce experience. Not only does our flexible packaging reduce touch points along the supply chain, it reduces the risk of damage in transit with both Compact by Design and SIOC-approved solutions.

Earning trust from your customers isn’t just about providing an excellent product, but about aligning all parts of the ecommerce experience with your company values. A sustainably-packaged item wrapped with care speaks volumes. To learn more about packaging for ecommerce, check out this webinar.

(1) US Census Bureau, Annual Retail Trade Survey/Mintel

(2) Shopify Plus, 2019

(3) Mintel

(4) Mintel

Der Karton hat innen und außen eine Schicht aus hochwertigem Polyethylen (PE). Außerdem gibt es eine hauchdünne Aluminiumschicht und eine weitere PE-Schicht auf der Innenseite. Der Druck erfolgt auf der äußersten PE-Schicht. Das bedeutet, dass die gedruckte Farbe nicht weiter überlaminiert wird.

Für den ersten reprografischen Satz und für wesentliche Korrekturen werden 5 Arbeitstage benötigt. Einfache oder geringfügige Korrekturen (wie z. B. Textänderungen) können innerhalb von 2 bis 3 Arbeitstagen erledigt werden. Weitere Einzelheiten entnehmen Sie bitte der Infografik zu unseren Bearbeitungszeiten.

Im Allgemeinen können bis zu sechs Farben verwendet werden. Die Verwendung von fünf Farben erhöht jedoch die Flexibilität innerhalb des Produktionsprozesses und ermöglicht somit kürzere Bearbeitungszeiten.

Metallicfarben können auf den Proofs nicht farbverbindlich dargestellt werden. Bei Verwendung von Metallic-Farben erhalten Sie von uns echte Farbkarten mit dem gewünschten Metallic-Ton. Für die in Frage kommenden Farben wäre also die gewählte Farbkarte und nicht der Proof maßgebend und farbverbindlich.

Parallel zur Dekorgenehmigung muss die Bestellung des Packungsmaterials eingehen. Ohne eine Bestellung der Kartonpackungen kann die Gravur des Zylinders und damit die Produktion des Packmittels nicht in Gang gesetzt werden.

Dies wird als Trapping bezeichnet, eine Funktion, die auf die tiefdruckfähigen Daten in der reprografischen Zusammensetzung angewendet wird. Dies trägt dazu bei, mögliche Passerschwankungen innerhalb der Produktion zu minimieren. Das Trapping sorgt dafür, dass weiße Blitzer und unscharfe Kanten vermieden werden.